SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Starting my build today.
/cgi-bin/YaBB.pl?num=1406128843

Message started by jachase1980 on 07/23/14 at 08:20:43

Title: Starting my build today.
Post by jachase1980 on 07/23/14 at 08:20:43

quick question on seat anyone have 'biltwell slimline' it looks like it will fit real well on the bike.

Title: Re: Starting my build today.
Post by Demin on 07/24/14 at 06:13:35

Haven't actually used the Biltwell.But I like the small solos on these bikes.

http://p1.bikepics.com/2014/06/12/bikepics-2675256-800.jpg
http://p1.bikepics.com/2008/05/23/bikepics-1298492-800.jpg

Title: Re: Starting my build today.
Post by jachase1980 on 01/24/15 at 10:30:59

so here is a quick pic of the bike. Almost done just have turn signals mounting exhaust tip and wrap on the header.

And another pic of the battery mount

Title: Re: Starting my build today.
Post by Demin on 01/24/15 at 10:33:03

Looks good. 8-) 8-) 8-)

Title: Re: Starting my build today.
Post by jachase1980 on 01/24/15 at 10:35:42

dont know what happened to last pic

Title: Re: Starting my build today.
Post by verslagen1 on 01/24/15 at 11:09:19

bad idea to have any hoses or wires near the belt... it will saw right thru them.

Title: Re: Starting my build today.
Post by jachase1980 on 01/24/15 at 13:43:45

Pic of that wire was just to show how supporting the battery all the wires are tucked away neatly and are covered. actually used the cover for the emergency tool. Here is my cam tension mileage of 5140

Title: Re: Starting my build today.
Post by jachase1980 on 01/24/15 at 13:59:32

and the other side cant get good angle of front while its on the lift but really not too much of a change to that end. We did strip down the front turn signals to the brass mounting bracket and tapping them and using them for the bullet signals.

Title: Re: Starting my build today.
Post by paulmarshall on 01/24/15 at 23:47:57

Nice color what color is it?

Title: Re: Starting my build today.
Post by jachase1980 on 01/25/15 at 09:33:08

from prismaticpowders.com name was "Copper Jacket" I dont think the photo does the job justice on the paint.