SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Seat mod
/cgi-bin/YaBB.pl?num=1406036744

Message started by GBG on 07/22/14 at 06:45:43

Title: Seat mod
Post by GBG on 07/22/14 at 06:45:43

I'm sure it has been addressed, but I'm going to do the front seat mod, hopefully today. What is the size of the bolt?
Just trying to save time in taking the seat off, then putting it back on to ride to the hardware store.

Greg

Title: Re: Seat mod
Post by Dave on 07/22/14 at 07:08:17

Well.....from memory the hex size is 10mm - so that would mean the threaded portion is 6mm.

Not sure what length you need. Have you looked in the Tech Section to see if the Seat Mod methods are listed?

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1181745927

Dave

Title: Re: Seat mod
Post by Dave on 07/22/14 at 07:11:48

No...I guess you didn't look in the Tech Section Index with links. There is a lot of good articles in the Tech Section.....folks post the "HOW TO" things in there....so you can benefit from them having already "done it".

Here is the "How To":

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1109035237

Title: Re: Seat mod
Post by GBG on 07/22/14 at 10:18:15

I must have overlooked the sizing when searching.
Thanks for the links.