SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Cafe >> Kuryakyn Switchblade Footpegs
/cgi-bin/YaBB.pl?num=1405435010
Message started by jman on 07/15/14 at 07:36:50

Title: Kuryakyn Switchblade Footpegs
Post by jman on 07/15/14 at 07:36:50
I saw these pegs in a local shop, and I'm just wondering if they would work on a Savage.

Thoughts?

http://www.kuryakyn.com/products/623/switchblade-pegs

Title: Re: Kuryakyn Switchblade Footpegs
Post by EJID on 07/15/14 at 08:16:20
At $140/pr they sure do look purty in the showroom but I'm not forking that over for mine.
http://www.kuryakyn.com/images/item/Large/4445-5.jpg.ashx?width=576&scale=canva

I picked up a pair of used Kuryakyn ISO pegs from a HD from eBay for $10 that only needed a different spacer & bolt to make them work on my bike.

http://p1.bikepics.com/2011/07/18/bikepics-2242179-800.jpg

Title: Re: Kuryakyn Switchblade Footpegs
Post by jman on 07/15/14 at 09:14:50

7B74777A3E0 wrote:
At $140/pr they sure do look purty in the showroom but I'm not forking that over for mine.
http://www.kuryakyn.com/images/item/Large/4445-5.jpg.ashx?width=576&scale=canva

I picked up a pair of used Kuryakyn ISO pegs from a HD from eBay for $10 that only needed a different spacer & bolt to make them work on my bike.

http://p1.bikepics.com/2011/07/18/bikepics-2242179-800.jpg



Would you mind taking one off and showing what you had to do to make them work?

Title: Re: Kuryakyn Switchblade Footpegs
Post by EJID on 07/15/14 at 09:20:49
Here's the post from the tech section...  8-)

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1245903031

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.