SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> reving motor in neutral /cgi-bin/YaBB.pl?num=1404416324 Message started by snick on 07/03/14 at 12:38:44 |
Title: reving motor in neutral Post by snick on 07/03/14 at 12:38:44 I rev my motor in neutral and it shuts off can someone direct me to a tech I didnt see one im rejetting |
Title: Re: reving motor in neutral Post by snick on 07/03/14 at 12:56:14 I think i might be too rich on pilot jet 150 main 55 pilot even 52.5 pilot 0.61 spacer im gonna try 50 pilot little less on spacer |
Title: Re: reving motor in neutral Post by verslagen1 on 07/03/14 at 13:17:04 If you shaved the white spacer to .61mm and it's too rich, you probably shaved it too thin. Try .9mm and up your idle speed. |
Title: Re: reving motor in neutral Post by snick on 07/03/14 at 13:30:18 Ok will try |
Title: Re: reving motor in neutral Post by Tocsik on 07/03/14 at 13:39:48 What's your altitude? |
Title: Re: reving motor in neutral Post by snick on 07/03/14 at 13:53:47 It is actually 0.061" i didnt measure @ mm |
Title: Re: reving motor in neutral Post by snick on 07/03/14 at 13:57:34 I'm in Illinois so my altitude is about 583 |
Title: Re: reving motor in neutral Post by Kris01 on 07/03/14 at 14:12:50 So why are you revving it in neutral? |
Title: Re: reving motor in neutral Post by verslagen1 on 07/03/14 at 14:12:52 362B2C262E450 wrote:
actually, I made a mistake (threw off by the missing zero), I meant .09" so add a washer :) |
Title: Re: reving motor in neutral Post by snick on 07/03/14 at 15:21:38 Ok so i put a 50 pilot went about 1/12 mix screw n brought my idle up more it doesnt want to die in neutral ive yet to ride thanks on the idle screw suggestion it worked |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |