SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> NO fuel flow? /cgi-bin/YaBB.pl?num=1403966084 Message started by eppley on 06/28/14 at 07:34:44 |
Title: NO fuel flow? Post by eppley on 06/28/14 at 07:34:44 I just installed the Mikuni vm36. I can't get the fuel to flow to the carb. When the line is off it flows like crazy soon as I put it back on the carb it stops. I bought the large fuel valve from ryca. I have a feeling the float measurements are off or the petcock is not the one for this carb. Pls. Help. |
Title: Re: NO fuel flow? Post by Serowbot on 06/28/14 at 08:22:48 A carb don't care what petcock you use... Sounds like your float needle is stuck closed... (try tapping the bowl with a screwdriver handle)... (if that don't work, open up, and jiggle the floats 'till you see it drop)... |
Title: Re: NO fuel flow? Post by S-P on 06/28/14 at 18:59:56 Do you have a Raptor petcock and inline filter? Remove the inline filter and see if that helps. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |