SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Clamp on mirror
/cgi-bin/YaBB.pl?num=1403565333

Message started by Ap5112 on 06/23/14 at 16:15:33

Title: Clamp on mirror
Post by Ap5112 on 06/23/14 at 16:15:33

Need a clamp on mirror a small one nothing big or bulky for 1inch bars and the grips I have I can't get bar end mount style does anyone know or have any ideas where I can get one for a decent price?

Title: Re: Clamp on mirror
Post by Ap5112 on 06/23/14 at 16:34:52

Here's my bars I want it to mount from the side

Title: Re: Clamp on mirror
Post by WD on 06/24/14 at 08:20:43

Just use a Harley mirror. Remove a lever screw (or both), run a 5/16 drill bit through the screw hole as a clean up, and drop the Harley mirror through.

Clamp on mirrors aren't necessarily all that good. Emgo makes the best selection, so try JC Whitney and similar if you don't want to drop $30 or more each on HD/Indian "lollipop" replicas.

Title: Re: Clamp on mirror
Post by Ap5112 on 06/24/14 at 15:02:22

So if I do this will it underneath the bars I don't want any mirrors on top?

Title: Re: Clamp on mirror
Post by WD on 06/24/14 at 23:00:40

You can mount HD mirrors right side up or upside down. The stem is stepped and comes with hardware.