SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Petcock Vacuum Hose Size /cgi-bin/YaBB.pl?num=1403358214 Message started by BalingWire on 06/21/14 at 06:43:30 |
Title: Petcock Vacuum Hose Size Post by BalingWire on 06/21/14 at 06:43:30 Does regular vacuum hose from Autozone or O'Reily's adequately hold onto the ends and fit inside the spring fine? Or does it take a special part from Suzuki? Then again, maybe I can get another couple years service out of this hose. haha! (It looks cracked where the spring is sheering, and that might explain the hesitation when the throttle is cranked.) :) |
Title: Re: Petcock Vacuum Hose Size Post by S-P on 06/21/14 at 23:03:38 1A393431363F0F312A3D580 wrote:
One way to find out is pull the hose and spring and take it to Auto Zone with you. If they don't have "bike hose" try Ace Hardware or a bike shop. It's all standard stuff. But, I'd say ditch the stock petcock and vaccum hose and buy a Raptor. :) |
Title: Re: Petcock Vacuum Hose Size Post by WD on 06/22/14 at 07:55:07 Cycle Gear or similar. Get the dirt bike gas cap vent tubing that is in a small pail on the counter. Silicone hose, and comes in a variety of colors. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |