SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Harley pegs
/cgi-bin/YaBB.pl?num=1403293026

Message started by Ap5112 on 06/20/14 at 12:37:06

Title: Harley pegs
Post by Ap5112 on 06/20/14 at 12:37:06

I know this already has been talked about but I can't find any links on exactly how to make them fit anybody have any links or pics Ijust ddon't want to be making a thousand trips to Lowes?

Title: Re: Harley pegs
Post by Greg on 06/20/14 at 13:48:05

Drill the hole in the Harley peg to the same size as our peg. That's it. Some of the HD pegs lean down a little. To correct that, build up the top or where the "wing" is on ours to hold it level. I left mine leaning. It was more comfy for my bowl-leggedness. :)

Title: Re: Harley pegs
Post by Beagle on 06/21/14 at 11:15:19

5257505B5C56350 wrote:

The Harley Peg I used after drilling them down to fit out peg wobbles. I have used washers in their but they still move. :(

Title: Re: Harley pegs
Post by Greg on 06/21/14 at 11:26:03

I had to get the right thickness washers to stop the wobbling. The floorboards I just put on are a little thicker than the HD pegs. I need different washers to tighten them up.

Title: Re: Harley pegs
Post by Greg on 06/21/14 at 16:11:12

I just now finished getting my floor boards on. I ended up needing a combination of washer types. I used one wavey washer and one finishing washer per peg. And it works great. Tight and no wriggling.

Title: Re: Harley pegs
Post by Ap5112 on 06/21/14 at 20:24:26

Thanks guys I just got my Pegs on today a little sag but I like mine that way