SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Top triple clamp /cgi-bin/YaBB.pl?num=1402497198 Message started by Spamy on 06/11/14 at 07:33:17 |
Title: Top triple clamp Post by Spamy on 06/11/14 at 07:33:17 Anyone got a source for top triple clamps? Im doing a refresh on the bike and want to clean up the top triple. Tired of the old holes being there for the clamps. I remember someone had been plugging the holes, and that might be a viable solution. I just want it cleaned up. Will probably paint or powdercoat it black also. I have a chrome and a billet stock ones currently to mod if needed. |
Title: Re: Top triple clamp Post by Gerry on 06/11/14 at 08:54:28 There is this build... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304297812/15 He did a pretty good job of filling in the handle bar stem mount holes. And then there is the Dave Seidmen build that is covered in the Ryca builders gallery... http://rycamotors.com/customer_builds/ryca_customer_dseidman.html He machined out his top clamp between the webbing. I kind of stole his idea and made my own top clamp... http://i669.photobucket.com/albums/vv55/lotus23bsr/Public%20Album/Ryca%20CS-1%20Build/10th%20Installment/DSCN0974_zps48e148ff.jpg I could make another one, don't know what I would charge though. Gerry |
Title: Re: Top triple clamp Post by Serowbot on 06/11/14 at 09:01:57 Holes make yer' bike go faster... ;D... |
Title: Re: Top triple clamp Post by scubachef on 06/12/14 at 07:48:13 The plugged and machined top triple can be found in Aaron's thread below. He used to offer I as a service at 125.00 I think. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304297812/0 I smoothed mine using more budget minded means since I don't have a mill. You can see it on page 3 of my thread below. Not too difficult and didn't really take long. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1323576217/0 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |