SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Truck bed liner paint for crankcase covers /cgi-bin/YaBB.pl?num=1402413256 Message started by dhabicht1 on 06/10/14 at 08:14:16 |
Title: Truck bed liner paint for crankcase covers Post by dhabicht1 on 06/10/14 at 08:14:16 Has anyone tried this? I have some Rustoleum bed liner paint I was thinking about using for the clutch cover and stator cover but was wondering if it will get to hot for the paint, of course I will sand and prime with self etching primer first. |
Title: Re: Truck bed liner paint for crankcase covers Post by Serowbot on 06/10/14 at 08:31:15 I doubt it would handle the heat.... but, I would be more worried about it insulating the cases and raising engine temps... Your bike is air cooled... :-?... |
Title: Re: Truck bed liner paint for crankcase covers Post by shorty on 06/10/14 at 08:31:46 the crankcase covers don't get hot enough to burn the paint, I've used regular auto-body paint on lower engine parts without problems |
Title: Re: Truck bed liner paint for crankcase covers Post by dhabicht1 on 06/10/14 at 08:37:34 Thanks for the replies guys |
Title: Re: Truck bed liner paint for crankcase covers Post by verslagen1 on 06/10/14 at 08:48:13 7E687F627A6F62790D0 wrote:
Yeah, it'd be great for someone riding in the rain and snow. |
Title: Re: Truck bed liner paint for crankcase covers Post by S-P on 06/10/14 at 17:05:13 2731263B23363B20540 wrote:
Well, they DO paint bed liners with that stuff in Arizona.... ;) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |