SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Cafe >> Petcock replaced - Thanks
/cgi-bin/YaBB.pl?num=1401985129

Message started by Retired Rider on 06/05/14 at 09:18:49

Title: Petcock replaced - Thanks
Post by Retired Rider on 06/05/14 at 09:18:49

Being a newbie with limited mechanical skills, I celebrate small victories like today's.  Thanks to the instruction found on this forum I was able to change out the stock petcock for a Raptor in about 20 minutes.  I did so without skinning my knuckles and I didn’t even have to break out my best curse words  :)

Thanks again to everyone who contributes great information and advice on the forum. Greatly appreciated.

Title: Re: Petcock replaced - Thanks
Post by prechermike on 06/05/14 at 09:29:52

If you didn't skin your knuckles you didn't do it right, sorry.  :(

Put the old one back in and try again.  ;)

Title: Re: Petcock replaced - Thanks
Post by HAPPYDAN on 06/05/14 at 09:33:06


595B4C4A414C5B4440424C290 wrote:
If you didn't skin your knuckles you didn't do it right, sorry.  :(

Put the old one back in and try again.  ;)


Now that's just cold! ;D

Title: Re: Petcock replaced - Thanks
Post by Pine on 06/05/14 at 11:07:10

Congratz!

To be sure to block off the vaccum to the carb. Then go go do 60MPH for 30 minutes.. world of difference!

Title: Re: Petcock replaced - Thanks
Post by S-P on 06/05/14 at 16:28:45

Very cool... save up those cusswords. You'll need them for future maintenance endeavors.  ;)

Title: Re: Petcock replaced - Thanks
Post by prechermike on 06/06/14 at 04:52:18


67607162717A64756178140 wrote:
Very cool... save up those cusswords. You'll need them for future maintenance endeavors.  ;)


And the skin from your knuckles, too!  ;)

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.