SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Rear foot pegs/ License plate mount/ exhaust
/cgi-bin/YaBB.pl?num=1401428258

Message started by quentin99 on 05/29/14 at 22:37:38

Title: Rear foot pegs/ License plate mount/ exhaust
Post by quentin99 on 05/29/14 at 22:37:38

Anyone know how to remove the rear pegs? Im assuming you have to take off the rear tire. Is their a way that you dont have to take off the tire.

I need to make a license plate/ Brake light mount for my bike. I was thinking one that would mount off of the axle nut or suspension nut. (which I cannot get off because I removed the belt cover and then over tightened the nut)
I was thinking a piece of sheet metal or a l bracket. I know ebay sells them but 40 bucks for a curved piece of metal seems high when I could probably make one for under 10. Anyone make a bobber and make a license plate. Also need brake light ideas. Thinking an led strip will not be bright enough for day time use.

Can you remove the baffles on the stock exhaust. Will the bike still back fire if you straight pipe it. backfiring is awesome unless it happens when you turn off your bike. Next mod on the list is those gears.

Title: Re: Rear foot pegs/ License plate mount/ exhaust
Post by verslagen1 on 05/29/14 at 22:45:16

you might be able to just loosen the axle and adjusters and kick the wheel to one side.

never done it but maybe.

Title: Re: Rear foot pegs/ License plate mount/ exhaust
Post by quentin99 on 05/29/14 at 22:48:42

Oh fun. I'm not to comfortable with moving the wheel around. I dont want to accidently knock it out of alignment. Or have a serious speed wobble

Title: Re: Rear foot pegs/ License plate mount/ exhaust
Post by S-P on 05/29/14 at 22:49:35

6440505B415C5B0C0C350 wrote:

Anyone know how to remove the rear pegs? Im assuming you have to take off the rear tire. Is their a way that you dont have to take off the tire.

Sawzall? ;)

Title: Re: Rear foot pegs/ License plate mount/ exhaust
Post by quentin99 on 05/29/14 at 22:52:05

Genious and then I don't have a hole to fill

Title: Re: Rear foot pegs/ License plate mount/ exhaust
Post by WD on 05/30/14 at 07:30:01

Pop the pegs off, paint the bases black to blend in better. You can repurpose the peg brackets as fender stay mounts. Just need to weld or bolt a bracket on the swingarm that the fender end can bolt to and the whole thing will move like on a Drifter.

Title: Re: Rear foot pegs/ License plate mount/ exhaust
Post by quentin99 on 05/30/14 at 08:04:38

By pop off I assume you mean cut