SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> I'm going in....... /cgi-bin/YaBB.pl?num=1399682001 Message started by raydawg on 05/09/14 at 17:33:21 |
Title: I'm going in....... Post by raydawg on 05/09/14 at 17:33:21 Think I got all my ducks lined up, been reading...... Still, I hope the doctor remains on call this weekend :-X http://i299.photobucket.com/albums/mm288/eddy-haskell/eddy-haskell013/DSCF3435_edited-1_zps99c65e64.jpg (http://s299.photobucket.com/user/eddy-haskell/media/eddy-haskell013/DSCF3435_edited-1_zps99c65e64.jpg.html) Was running sorta iffy yesterday in a hard rain, not really missing, but not itself either.... Seemed to run a little better one click out on the choke, which leaves me to believe I am really due for this :) |
Title: Re: I'm going in....... Post by Serowbot on 05/09/14 at 18:11:43 Rotsa' ruck, Raydawg... ;D... |
Title: Re: I'm going in....... Post by justin_o_guy2 on 05/09/14 at 18:21:21 Blow the dirt out of the plug hole before ya pull it. Have a place ready to lay the tank down so the speedo cable doent take a beating, |
Title: Re: I'm going in....... Post by pgambr on 05/09/14 at 18:45:23 There's a good thread in the tech section on the pet change. I'm going to put on the versey tensioner as well. One question, do I need to reset the timing TDC? Thanks. |
Title: Re: I'm going in....... Post by pgambr on 05/09/14 at 18:47:31 Check and see if you got a genuine yammy pet. Unfortunately, I got a knock-off one in a yammy box. :( |
Title: Re: I'm going in....... Post by Serowbot on 05/09/14 at 18:51:31 Timing won't change unless you remove the chain completely... |
Title: Re: I'm going in....... Post by pgambr on 05/09/14 at 18:55:07 1006110C14010C17630 wrote:
Ok, thanks Serow. Only 700+ posts before I asked an intelligent question. :-? |
Title: Re: I'm going in....... Post by raydawg on 05/09/14 at 19:06:19 4D5A5C505F4F3D0 wrote:
Well, got it from Bike Bandit, 5LP-24500-01, has an X41 stamped on the flange, box says genuine w/ made in Japan on it, paid like 20 sumtin, so I hope so :-/ |
Title: Re: I'm going in....... Post by verslagen1 on 05/09/14 at 19:23:18 the numbers stamped in the side are probably tool numbers so they can track the quality. |
Title: Re: I'm going in....... Post by Beagle on 05/09/14 at 20:14:17 You can do it! :) |
Title: Re: I'm going in....... Post by S-P on 05/09/14 at 20:57:29 I won't try to stop you! ;) |
Title: Re: I'm going in....... Post by Serowbot on 05/09/14 at 22:14:01 Now that you've announced it, Ray... You are so buggered if you screw it up... ;D... Just don't put the oil filter in backwards... That never ends well... ;)... |
Title: Re: I'm going in....... Post by Dave on 05/10/14 at 03:56:09 Well daggumit!.....You are going to spend some quality time with your bike and all I can find to do this weekend is work on my lawn mower and cut my grass! (Thread Hijack) Great photo......what kind of camera? |
Title: Re: I'm going in....... Post by raydawg on 05/10/14 at 06:11:36 6D565B4C5D514A4C575F524D3E0 wrote:
Fuji HS50 EXR thanks.... BTW, did OF whack you up against the head with a long handled screwdriver....... only folk I ever heard round here say daggumit? ;) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |