SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> cheapskate riser /cgi-bin/YaBB.pl?num=1399231924 Message started by zipidachimp on 05/04/14 at 12:32:04 |
Title: cheapskate riser Post by zipidachimp on 05/04/14 at 12:32:04 looking at my new bike, instead of buying short risers, can I just bolt the crosspiece under the handlebar and toss the long bent pieces, ending up with my handlebars sitting on top of the tripletree? would save me some money. ::) part #8 on bike bandit 'steering stem' |
Title: Re: cheapskate riser Post by justin_o_guy2 on 05/04/14 at 13:01:09 Bars that low would smack the tank, I think,, |
Title: Re: cheapskate riser Post by zipidachimp on 05/04/14 at 13:54:56 I'd replace the flat bar with my favorite 'flat-track' bar. Any way, the stock bars are way too close, and mirrors are almost useless. |
Title: Re: cheapskate riser Post by justin_o_guy2 on 05/04/14 at 21:29:27 Have ya considered turning the stock risers around? & yea, the mirrors give a guy a look at the shoulders. I know, ya nipped the ripples off.. BUt look at the stock risers, maybe bakkerds, mite help |
Title: Re: cheapskate riser Post by zipidachimp on 05/05/14 at 01:54:21 my preference has always been to get the handlebar clamps(risers) as close to the upper tree as possible and then adjust the reach by choice of handlebar. My all-time favorite style of bike has been an AMA flat-tracker. http://4.bp.blogspot.com/_U05qk-NwWZ0/TScLqsX67nI/AAAAAAAAA3s/V3c6qENPbBI/s1600/186a_1+1970+Harley+Davidson+XR-750.jpg Beauty, eh! (the fact that this is a harley is irrelevant. any engine will do) 8-) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |