SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> rear fender /cgi-bin/YaBB.pl?num=1399119285 Message started by JBK on 05/03/14 at 05:14:45 |
Title: rear fender Post by JBK on 05/03/14 at 05:14:45 Right now I'm running naked. Need options for mounting without welding. Would like it to be as tight to tire as possible. |
Title: Re: rear fender Post by Demin on 05/03/14 at 06:33:16 That's easy.........Northern Tool or Tractor Supply.Cut to length,drill holes, Cut out for belt. Here is one that is flat on both ends.Fits frame nice and kinda gives you a bobbed look at the rear. http://p1.bikepics.com/2012/06/16/bikepics-2416189-full.jpg Here is a round one. http://p1.bikepics.com/2008/07/23/bikepics-1362541-800.jpg And If you have somebody thatr likes'em real short.Give him the leftover piece. http://p1.bikepics.com/2011/07/12/bikepics-2238909-800.jpg |
Title: Re: rear fender Post by Demin on 05/03/14 at 06:35:49 If you are still running the suspension.Make a mounting tab "L" bracket to bolt the front of the fender to the swingarm.Get a couple pieces of flat stock or round bar,drill it and bolt to rear of swingarm and fender. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |