SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> pIpes /cgi-bin/YaBB.pl?num=1397157771 Message started by tcp29 on 04/10/14 at 12:22:51 |
Title: pIpes Post by tcp29 on 04/10/14 at 12:22:51 do I need to richen the carb if I install a jarden insert pipe on my 2007 s40? |
Title: Re: pIpes Post by Kris01 on 04/10/14 at 12:23:58 Absolutely! |
Title: Re: pIpes Post by Coaxial on 04/10/14 at 13:04:56 White spacer mod would be necessary. |
Title: Re: pIpes Post by verslagen1 on 04/10/14 at 13:06:50 19353B22333B365A0 wrote:
Putting the cart before the horse? |
Title: Re: pIpes Post by Michael L on 04/10/14 at 13:12:27 Spacer mod isn't necessary, only rejetting.. But you should rejet your bike even if you were runing with a stock exhaust.. I would suggest you read up on it in the tech section.. |
Title: Re: pIpes Post by tcp29 on 04/10/14 at 13:21:33 ok thanks to all :) |
Title: Re: pIpes Post by Coaxial on 04/10/14 at 19:26:45 43504746595452505B04350 wrote:
Putting the cart before the horse?[/quote] Even with the Jardin Rumblers? It fixed my backfire for me. |
Title: Re: pIpes Post by verslagen1 on 04/10/14 at 19:38:17 09252B32232B264A0 wrote:
Proper procedure is to set the pilot, then the main and then adjust the needle. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |