SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Carb screws UGH /cgi-bin/YaBB.pl?num=1395532630 Message started by S-P on 03/22/14 at 16:57:10 |
Title: Carb screws UGH Post by S-P on 03/22/14 at 16:57:10 Yeppers. Re-jetting the carb and doing the spacers. I got 3 screws on the top to break loose, the 4th started to strip out. So I stopped and I got an impact thingy from Harbor Freight and promptly broke the corner off (I didn't have a bench vise to hold the carb). Thank God for JB Weld. It might not be pretty when I'm done, but hopefully it'll put gas in the engine. :-/ |
Title: Re: Carb screws UGH Post by shorty on 03/23/14 at 04:55:14 It'll probably be OK with JB, no pressure there, JB is fuel proof |
Title: Re: Carb screws UGH Post by justin_o_guy2 on 03/23/14 at 08:28:19 That IS fuel proof, not fool proof. & FWIW, I didnt have a vise TILL I made it a point to get one. Theres a reason people have a vise, like any other tool. I now have 2, one old fat clunky thing & a smaller on that twists & turns all kindsa ways. HF has a nice little vise for about $30.00. & when youre working on building something that requires a constant "grind, file, fit" cycle to get it right, stick vise grips in the vise, then you can clip it in & pop it out real quick. |
Title: Re: Carb screws UGH Post by shorty on 03/23/14 at 10:40:03 my riding buddy has only 2 tools in his bike kit, small vice grip & Phillips screwdriver |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |