SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> front turn signal removal /cgi-bin/YaBB.pl?num=1395353314 Message started by stinger on 03/20/14 at 15:08:33 |
Title: front turn signal removal Post by stinger on 03/20/14 at 15:08:33 I've checked everywhere but I can find no info on the best way to remove the front turn signal brackets on the front forks. Can I pry then apart after removing turn signal or do I have to remove the handle bars and slide them off? That was what I was told, but it sounds like a lot of work that I prefer not to go thru...Thanks! |
Title: Re: front turn signal removal Post by verslagen1 on 03/20/14 at 15:31:07 raise front end remove fork cap, loosen clamp bolt, spacer, slide fork tube down. remove offending bracket. raise fork tube, install cap, and spacer, tighten clamp. rinse and repeat. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |