SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> idle mix screw
/cgi-bin/YaBB.pl?num=1394146934

Message started by procrastinator on 03/06/14 at 15:02:14

Title: idle mix screw
Post by procrastinator on 03/06/14 at 15:02:14

Ok guys I went to adjust the idle mix and the brass plug was already taken out. So not knowing what it's set at if I turn the screw clockwise that will close it correct?? Once I have it closed all the way how many turns counter clockwise is a good starting place to start my adjustment from?? I'm trying to cut out some of the backfiring and popping when I idle down to stop.

Title: Re: idle mix screw
Post by verslagen1 on 03/06/14 at 15:19:14

You currently are at a good place to start.
Follow instructions in 'bots tuning for idiots and you should be good.

Title: Re: idle mix screw
Post by Serowbot on 03/06/14 at 16:10:59

I didn't say idiots... ;D...
This, is a link...->Serowbot's carb tuning tips for beginners... (http://suzukisavage.com/cgi-bin/YaBB.pl?num=1309246277)

Title: Re: idle mix screw
Post by procrastinator on 03/06/14 at 16:28:09

I found it. I feel like a idiot I read that before and forgot all about it. Duh :-[