SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Ring end gap /cgi-bin/YaBB.pl?num=1393966374 Message started by Colxjon on 03/04/14 at 12:52:54 |
Title: Ring end gap Post by Colxjon on 03/04/14 at 12:52:54 Does anyone know what the ring end gap should be for a 96 mm piston. I have the manual and it says to shot in between 0.012-0.018...does this number also apply for overview pistons and should I keep it right at 0.012 or more aimed at the higher numer around 0.018? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |