SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Will these bearings work for a sporty front end?
/cgi-bin/YaBB.pl?num=1393660219

Message started by wickedbiker on 02/28/14 at 23:50:19

Title: Will these bearings work for a sporty front end?
Post by wickedbiker on 02/28/14 at 23:50:19

I have not found a set of raked trees for the savage to save my life, but I found these bearing on eBay apparently they take a 1" stem is it possible to use raked trees for a Harley using these to convert?

http://www.ebay.com/itm/Suzuki-Springer-Frontend-Conversion-Kit-/170915629323?pt=Motorcycles_Parts_Accessories&hash=item27cb5d890b&vxp=mtr


http://i.ebayimg.com/00/s/MTA4M1gxNTY5/$(KGrHqV,!nsFBZBUNPmTBQYiObq!bw~~60_57.JPG

Title: Re: Will these work for a sporty front end?
Post by old_rider on 03/01/14 at 19:52:18

Funny that the add says Suzuki but all the bikes pictured are yamaha's. I'd call and make sure....



Title: Re: Will these work for a sporty front end?
Post by wickedbiker on 03/10/14 at 08:05:10

I wrote the guy on ebay and they have a lot of different makes and models. They say that they are custom made for each bike and that they make a set for the savage for sure...

FITS THESE SUZUKI MODELS ONLY:
GS450 All, GS500 All, GS650 All, LS650 All, VS700 All, GS750 All, VS800 92-09,GS1000 All, GS1100 All,VS1400 87-95   DON'T SEE YOURE MODEL LISTED?  Contact us as we can make a kit for just about any bike.

Title: Re: Will these bearings work for a sporty front en
Post by axa on 03/10/14 at 11:40:27

Don't mean to hijack the thread just let me know to go elsewhere, but what do i need to know about swapping front ends?  I have a DNA springer on another bike that I'm thinking of swapping out to the savage, but haven't learned anything rehardibg it yet.
Are there basic measurements like a tire? or Is it all over the place?
Please save me some time in research...

Title: Re: Will these bearings work for a sporty front en
Post by verslagen1 on 03/10/14 at 11:45:19


3C253C5D0 wrote:
Don't mean to hijack the thread just let me know to go elsewhere, but what do i need to know about swapping front ends?  I have a DNA springer on another bike that I'm thinking of swapping out to the savage, but haven't learned anything rehardibg it yet.
Are there basic measurements like a tire? or Is it all over the place?
Please save me some time in research...


WTF?

Title: Re: Will these bearings work for a sporty front en
Post by Dave on 03/10/14 at 11:57:19

"rehardibg"

I think that is what you get when you type "regarding".....and you have some fingers that become uncooperative.

Title: Re: Will these bearings work for a sporty front en
Post by ChrisTech on 03/10/14 at 12:56:56

Axa have you gotten any farther on your vintage voodoo build, I'm just about ready to hit the road with mine.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.