SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> starter relay /cgi-bin/YaBB.pl?num=1392875655 Message started by bobdog on 02/19/14 at 21:54:15 |
Title: starter relay Post by bobdog on 02/19/14 at 21:54:15 Does a starter relay contian oil ? I know ! I need a manual ,but I think my relay blew . |
Title: Re: starter relay Post by verslagen1 on 02/19/14 at 22:01:37 No, but they do stick try wrapping on the fender below the ig switch. |
Title: Re: starter relay Post by WD on 02/19/14 at 23:37:51 1113161411220 wrote:
The Savage one isn't model specific. Take the big white boat across the funny tasting puddle, hit up "roached out pieces of monkey s**t", er, Bent Bike, $35 for a new universal type versus $90 or better from the stealership. FYI, they almost never fail on these bikes. But the decompression solenoid relay... 3 years and counting on that particular work around... got so bored I redesigned the whole bike. |
Title: Re: starter relay Post by bobdog on 02/20/14 at 01:37:50 Thanks , seems to work now but I have to play a bit with the switch (button) . Do those wear out ? |
Title: Re: starter relay Post by WD on 02/20/14 at 07:49:16 696B6E6C695A0 wrote:
Yes, but more likely it just needs a good cleaning. Pencil eraser like you used to do for slot cars and model railroads. |
Title: Re: starter relay Post by Serowbot on 02/20/14 at 08:06:45 Yup... Contacts get dirty... switch or relay... Just take apart and clean them... Relay's are often sealed, but can be taken apart with some fiddling... inside looks a lot like old fashioned ignition, contact points.... can't usually get a pencil eraser in those... use a piece of emery cloth and a little wd-40 or rubbing alcohol... |
Title: Re: starter relay Post by groupus on 02/20/14 at 08:11:47 Like they said, clean the contacts in the handlebar switch. I found a bugs had gotten jammed up in mine. |
Title: Re: starter relay Post by verslagen1 on 02/20/14 at 08:28:46 5153565451620 wrote:
Does a savage backfire in the woods? ;D |
Title: Re: starter relay Post by justin_o_guy2 on 02/20/14 at 09:22:18 Before you start into that switch, sweep up the work area. Then lay towels around. Theres some little stuff in there,, go slow, have good lite, |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |