SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> decomp. wiring diagram /cgi-bin/YaBB.pl?num=1392843126 Message started by Steddy58 on 02/19/14 at 12:52:06 |
Title: decomp. wiring diagram Post by Steddy58 on 02/19/14 at 12:52:06 Hi all, after checking the wiring diag. the 1987-94 diagram shows a starter solenoid controller between the starter motor and licence plate light and only when you get to the 1995 diagram and following diagrams does it show what it on my bike which is two white wires leading to a decomp.solenoid so could someone please explain what I am looking at since my bike is supposed to be a 1988 model, please excuse my stupidity Embarrassed |
Title: Re: decomp. wiring diagram Post by Dave on 02/19/14 at 13:24:25 It appears that the 87-94 diagram calls the decompression solenoid a "starter solenoid controller" and shows it round. The 95 and later diagrams call it a "decompression solenoid" and show it square. On all bikes it is the same thing.....the bulky solenoid under the fuel tank that pulls on the cable....when told to do so by the decompression controller On all the diagrams they show a red and black wire that comes from the decompression controller, and a black wire that ultimately connects to a black/white wire which is a ground. |
Title: Re: decomp. wiring diagram Post by Steddy58 on 02/19/14 at 14:14:40 Thanks Dave,see what you mean about the red/back and solid black wire - dont these people know its bad enough without changing names and shapes.etc. :) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |