SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Better than oem clutch /cgi-bin/YaBB.pl?num=1392824108 Message started by bobdog on 02/19/14 at 07:35:08

Title: Better than oem clutch Post by bobdog on 02/19/14 at 07:35:08 Who makes a good aftermarket clutch kit , at a good price ? Will work good with chain conversion . ;

Title: Re: Better than oem clutch Post by justin_o_guy2 on 02/19/14 at 08:03:23 What performance difference are ya lookin for? The clutch isnt the weak spot on these.. UNLESS you go jackin up the springs, then the sintered throw out will break, its been known to break on stock clutch pressures.. If you do anything to the clutch that would mean stronger clamping forces, Id recommend taking the throwout to a shop & have a steel, billet cut out. I shimmed my springs just a little & mine broke, BUsted the cam chain guide the tensioner mounts to,,No tellin how ugly that coulda been if it had been at higher speeds..

Title: Re: Better than oem clutch Post by verslagen1 on 02/19/14 at 08:51:24 If you're slippin', you're out of adjustment. check the tech section for how-to's

Title: Re: Better than oem clutch Post by justin_o_guy2 on 02/19/14 at 11:05:06 Or. You have the wrong oil

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.