SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Savage "Plug/Cap" Leak /cgi-bin/YaBB.pl?num=1392761853 Message started by NorCalRider on 02/18/14 at 14:17:32 |
Title: Savage "Plug/Cap" Leak Post by NorCalRider on 02/18/14 at 14:17:32 I replaced the plug/cap this weekend. Took a long time since I haven't done this before. My hats off to Savage_Greg, Versi, Digger, OldFeller and all others who added valuable information to the ongoing thread. I could not have done it without all your help. So, the bike is not leaking anymore but since then there is a loud ticking sound coming from it (underneath the head cover, possibly the cam chain). I am attaching the sound file and will appreciate if anyone can help me figure this out. It is very likely I messed something up when putting the headcover back on. The bike is '99 stock except Raptor petcock and had 5,750 miles on it. Thanks. |
Title: Re: Savage "Plug/Cap" Leak Post by verslagen1 on 02/18/14 at 14:25:54 try readjusting the valves. If 1 (R vs. L) is slightly tighter than the other... you'll get a tap. |
Title: Re: Savage "Plug/Cap" Leak Post by old_rider on 02/18/14 at 14:36:22 Since you remove the head to replace or reseat the plug, does the amount of sealant you use make a difference in the gap for your valve clearance? |
Title: Re: Savage "Plug/Cap" Leak Post by verslagen1 on 02/18/14 at 15:02:33 6F6C647269646572000 wrote:
yes, that's why you need to readjust afterwards. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |