SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Looking for tried and true 1986 chopwiring diagram
/cgi-bin/YaBB.pl?num=1392296298

Message started by ChrisTech on 02/13/14 at 04:58:18

Title: Looking for tried and true 1986 chopwiring diagram
Post by ChrisTech on 02/13/14 at 04:58:18

Ive been looking around the site for quite a while trying to fing a good definitive bare bones wiring diagram for my 86' bobber project. I can figure it out pretty easily and post what I find, but why bother if someone els before me has gone through the trouble (research). also if anyone want to chime in on how one goes about measuring an exhaust u bend radius. I'd like to buy a mandrel bent j pipe from summit (like $17 ) and weld it to my flange i plan on cutting off the stock pipe,I want it to look like the ryca bobber header.. Thanks chris

Title: Re: Looking for tried and true 1986 chopwiring dia
Post by Dave on 02/13/14 at 05:04:33

I have not seen anyone post a "how to" on cutting down the wiring harness for a bobber.

You might check the RYCA website and their YouTube videos. I know they provide infor on the Cafe' conversion wiring....maybe they do the same for their Bobber kits.

Title: Re: Looking for tried and true 1986 chopwiring dia
Post by verslagen1 on 02/13/14 at 07:36:51

check the tech section index... there's a couple of applicable titles.

simplified/chopper wiring

and

lengthening wire bundles for technique.

Title: Re: Looking for tried and true 1986 chopwiring dia
Post by ChrisTech on 02/13/14 at 09:49:53

Thanks Dave and Vers.

Title: Re: Looking for tried and true 1986 chopwiring dia
Post by ChrisTech on 02/15/14 at 04:25:47

Anybody know how the neutral indicator works. So I've chopped my wiring, ive rid the bike of the side stand switch and diode, with I believe the neutral indication wire coming from the engine case ties into. What I need to know is how would I incorporate that into my wiring. Does that wire send a certain voltage at some point, or does it work off resistance? I can test it once it's up and running, but if anyone has any experience , that would be great thanks.

Title: Re: Looking for tried and true 1986 chopwiring dia
Post by ChrisTech on 02/15/14 at 06:59:36

I think I figured it out.. Neutral switch is just a relay that makes to ground! Send 12v through bulb and use the blue wire from the relay ay my ground.

Title: Re: Looking for tried and true 1986 chopwiring dia
Post by Steve H on 02/15/14 at 07:05:43

You got it, Chris.

Neutral switch just grounds. That's the way to do it.