SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> frame specs /cgi-bin/YaBB.pl?num=1391703589 Message started by Jsud04 on 02/06/14 at 08:19:49 |
Title: frame specs Post by Jsud04 on 02/06/14 at 08:19:49 Anyone know off hand the diameter of the frame tubes specifically the front down tubes? |
Title: Re: frame specs Post by justin_o_guy2 on 02/06/14 at 10:17:00 Take a Non stretchy string, wrap around the tube in question. mark where they cross, measure that length, divide by Pi, 3.1416.. Why? You planning on cutting? If you do, then find a piece that slips inside the frame tube about an inch long. Make line up real easy & make welding it back easier & stronger. |
Title: Re: frame specs Post by Jsud04 on 02/06/14 at 10:26:33 Noah. I am sitting at work contemplaiting my highway bar build...I need the OD of the popes for my u bolts and the bike is 70 miles away |
Title: Re: frame specs Post by justin_o_guy2 on 02/06/14 at 11:03:56 Well,, if no one pops the answer up, you could buy clamps that you think will do the job, you know its not huge & its not tiny, clamps only come in so many sizes & arent real pricy, so, get enough in different sizes to do the job & return the ones you dont use.. Ive had to do things that way several times,, Of course, that means you WILL make 2 trips to the store. You mite get lucky just looking at the clamps & grabbing the size you think will do the job, |
Title: Re: frame specs Post by Jsud04 on 02/06/14 at 12:48:58 Oh no....that means I'll end up buying some tools : ) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |