|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> new performance exhaust pipe /cgi-bin/YaBB.pl?num=1391279011 Message started by victorbsa on 02/01/14 at 10:23:31 |
|
Title: new performance exhaust pipe Post by victorbsa on 02/01/14 at 10:23:31 I saw that cleveland cycle works site that sells those chinese 250 single bike new for about 3k. Anyway they sell custom header pipes for $99. Some one should be able to come up with something good thats more affordable. I still would like to make my bike british ,scrambler look, have foot pegs centrally mounted. And most important, see a RYCA bike with sporster or preferable stock suzuki tank. The tank RYCA puts on the bobber comes in 2 sizes, and I keep calling it sportster but they don't. Someone here made a battery/electric. relocating box...do they offer them for sale to us?? |
|
Title: Re: new performance exhaust pipe Post by Serowbot on 02/01/14 at 12:46:13 I went for a bit of an English Scrambler look... on a budget... (High pipe and midsets were out of the budget)... Harley shorty muff, 12" Intruder shocks, lifted seat and tank, smaller rear fender with mudflps and tank knee pads... , and bike pedals for footpegs... Do the little things you can do,.. and wait for the big things... ;)... http://i600.photobucket.com/albums/tt82/serowbot/rerun/rrshot026.jpg http://i600.photobucket.com/albums/tt82/serowbot/rerun/lemone004.jpg http://i600.photobucket.com/albums/tt82/serowbot/rerun/rrshot051.jpg |
|
Title: Re: new performance exhaust pipe Post by S-P on 02/01/14 at 17:15:53 Serowbot, I'm still hoping you'll post something about how you did the bike pedals..... |
|
Title: Re: new performance exhaust pipe Post by Serowbot on 02/01/14 at 20:43:07 50574655464D5342564F230 wrote:
Ya musta' missed it... ;)... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1390423306/#6 |
|
Title: Re: new performance exhaust pipe Post by Albert Verdugo on 07/14/15 at 14:47:56 Really cool, love the chrome! btw witch gas tank knee pads you bought? I am looking for some but not quite sure witch ones will fit well |
|
Title: Re: new performance exhaust pipe Post by Art Webb on 07/15/15 at 08:41:39 what size intruder did the shocks come off? I see a lot of ideas on that bike I like, Serow |
|
Title: Re: new performance exhaust pipe Post by Boogie_with_Stu on 07/17/15 at 05:45:40 Serowbot, that bike looks just flat out awesome! Very nice work. 8-) Pegs are easier then most people think. All you need is a set of pegs with the right male mount, and then bore out the hole to fit our screw on the savage. Then, for angle adjust, there's a screw in the end of the peg that you can loosen....rotate the peg to desired angle, and tighten again. Many types of Kuryakyn pegs will work if bored out and shimmed with a washer. Theres a guy on Ebay that sells these pegs and he bores out the hole for you and includes the shims. Just search for Suzuki Savage/ S40 pegs. Pic is for reference only, but shows the adapter and screw. |
|
Title: Re: new performance exhaust pipe Post by Serowbot on 07/17/15 at 06:33:26 Somebody dug up a 5 month old post... ;D... Tank pads are just rubber running mat cut to shape and rubber cemented on. Also did a stripe down the center of the tank and rear fender with it. Ace Hardware sells it 3' wide by the ft. $3 or $4 . Mudflaps are the same stuff but thicker, and cost a couple dollars more per ft. Shocks are off an Intruder 800. 2" taller, mine are very soft, but have great travel. very smooth ride. Vintage MX'rs here use that running mat for all kinds of stuff... It's very handy to have some around. 8-)... |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |