SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> 30mm carburettor
/cgi-bin/YaBB.pl?num=1389400975

Message started by diass on 01/10/14 at 16:42:55

Title: 30mm carburettor
Post by diass on 01/10/14 at 16:42:55

Hello i have a question. Does a 30mm OKO carb work on a savage. Properly jetted of course. Cheers

Title: Re: 30mm carburettor
Post by LANCER on 01/11/14 at 03:45:01


272A223030430 wrote:
Hello i have a question. Does a 30mm OKO carb work on a savage. Properly jetted of course. Cheers


OKO ?  What is that supposed to be ?  
30mm is too small for the engine, but that being said, you can put it on the engine IF you can find the correct size rubber flange to mount it on.
The 30mm size carb would certainly be very economical milage wise, but the performance would be severely limited.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.