SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Manifold bolts /cgi-bin/YaBB.pl?num=1385657745 Message started by NHLycan on 11/28/13 at 08:55:45

Title: Manifold bolts Post by NHLycan on 11/28/13 at 08:55:45 I'm putting her back together after putting on the Versy adjuster and was staring at the exhaust manifold bolts. They came out with only a little fuss but I'm not sure they're really designed for multiple uses. What's the group think? Reuse or replace? And when I put which ever ones back should I lock ease or high temp lube?

Title: Re: Manifold bolts Post by Serowbot on 11/28/13 at 09:27:19 I"ve reused them for 30k miles... Get them clean, use anti-seize, and don't over-tighten... I check them for snug at every oil change... ...( you might consider a new exhaust gasket... they compress upon multiple reuses)... (I have an old compressed one and a newer one on at the same time for more squish)...  ;D...

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.