SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> trailer hitch to pull trailer /cgi-bin/YaBB.pl?num=1385209984 Message started by frid on 11/23/13 at 04:33:04 |
Title: trailer hitch to pull trailer Post by frid on 11/23/13 at 04:33:04 I just got the 650 savage , now I need put a trailer hitch on it to pull my car top carrier popup camper , has anyone put a hitch on a savage bike here . my first time this was with my 250 roketa scooter . I put a hitch on it . I live north of Columbus ohio an pulled it on 71 to Kentucky an back did great . |
Title: Re: trailer hitch to pull trailer Post by frid on 11/23/13 at 04:37:42 another view |
Title: Re: trailer hitch to pull trailer Post by frid on 11/23/13 at 04:49:50 sorry thought I was in rubber side down , I know . no question here , I looked to try to send to rubber side down , cant figure it out , help. |
Title: Re: trailer hitch to pull trailer Post by verslagen1 on 11/23/13 at 08:37:49 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1343658167 |
Title: Re: trailer hitch to pull trailer Post by frid on 11/23/13 at 08:41:22 thank you |
Title: Re: trailer hitch to pull trailer Post by Serowbot on 11/23/13 at 09:42:18 I think I'd want the ball to pivot... something scary about it being fixed... :-?... |
Title: Re: trailer hitch to pull trailer Post by verslagen1 on 11/23/13 at 10:03:22 392F38253D28253E4A0 wrote:
that's what the dog said. ::) |
Title: Re: trailer hitch to pull trailer Post by frid on 11/23/13 at 14:10:42 yes pivot , the next hitch . will pivot. I heard of story's where trailers bounce around an tip around an it has a fixed ball on the hitch . |
Title: Re: trailer hitch to pull trailer Post by justin_o_guy2 on 11/24/13 at 11:14:38 Didnt that guy with the yellow savage with the Extendo gas tank mounted on the rear have a hitch? |
Title: Re: trailer hitch to pull trailer Post by verslagen1 on 11/24/13 at 11:23:50 0A151314090E3F0F3F07151952600 wrote:
yeah, it's a link in the link... jack650 |
Title: Re: trailer hitch to pull trailer Post by Jack_650 on 11/24/13 at 18:50:42 Why yes, I did have a hitch made for the Savage. http://www.bikepics.com/members/jazzcarter/00savage/ You should be able to figure out how it was put together from the pix. It goes on and comes off in about 5 minutes. The cross piece where the ball is bolted on is bolted in such a way that it comes apart in to halves. It's got some welding but could be bolted together. The only place a weld is nice is the half round pieces that bolts up at the top of the shock mounts. It's also overbuilt strength wise for the amount of weight a sane person would try to tow and stop with the Sav. Jack |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |