SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> rejet
/cgi-bin/YaBB.pl?num=1385157361

Message started by sleezyrider on 11/22/13 at 13:56:01

Title: rejet
Post by sleezyrider on 11/22/13 at 13:56:01

So it took me too long to figure out that my 86 savage backfires because she was jetted to run a little too lean to meet emission standards, and one know what size I should go to? Stock exhaust and everything still

Title: Re: rejet
Post by verslagen1 on 11/22/13 at 14:18:44

86's are jetted rich from the factory.
Lean jetting doesn't happen till '95

check you don't have holes in your pipes, nuts are tight, carb is clean and your filter is good.

Title: Re: rejet
Post by sleezyrider on 11/22/13 at 14:21:57

I've tried everything else, maybe somebody swapped my carb with a '95 or later carb, could you humor me and tell me what size jets I should have?

Title: Re: rejet
Post by Steve H on 11/22/13 at 19:59:24

The tech section and its index are your friend

http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1098869040 Stock carb specs

Title: Re: rejet
Post by frid on 11/23/13 at 04:12:46

wow ,people really know stuff here .please help me to , if you would , I put dual pipes on my 650 sav, now it may need rejet , should I get just a jet or two to try ,or get a stage 1or 2 jet kit .i have a 96 650 savage .thanks