SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Baffling home made turnout /cgi-bin/YaBB.pl?num=1384910087 Message started by vr6rippin on 11/19/13 at 17:14:47

Title: Baffling home made turnout Post by vr6rippin on 11/19/13 at 17:14:47 I just so happen to have a 1.75" u bend exhaust tube sitting out in my barn from another project, and looking at it I realized if I cut it at the radius longitudinally, it'll make a sweet little turnout, about 8" long. My question is: if I install the glass pack baffle sold by TC bros (http://www.tcbroschoppers.com/intake-exhaust/glass-packed-drag-pipe-baffle-for-1-75-od-pipes.html) will this be enough to make this a functional exhaust?

Title: Re: Baffling home made turnout Post by ZAR on 11/19/13 at 19:26:37 I think you'll find that baffle will not provide enough backpressure to assure proper running.....not to mention that thing will be loud....with a capital LOUD!

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.