SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Rear axle spacer
/cgi-bin/YaBB.pl?num=1384315780

Message started by Ragnar444 on 11/12/13 at 20:09:40

Title: Rear axle spacer
Post by Ragnar444 on 11/12/13 at 20:09:40

Been tearing my hair out, what little there is, trying to find one of my spacers. It seems to have rolled into another dimension. Anyone had any luck fabricating one?

Title: Re: Rear axle spacer
Post by old_rider on 11/12/13 at 20:27:29

It's under that piece of card board over there on the other side of the bike....

Title: Re: Rear axle spacer
Post by old_rider on 11/12/13 at 20:30:05

Well, that's were mine usually are after I find them 2 months later and have purchased new ones and replaced them already.

Title: Re: Rear axle spacer
Post by Ragnar444 on 11/12/13 at 21:34:00

You guys know exactly what will happen when I order a new one. I'll get an e-mail with a tracking number the next day saying it's on its way. Less then an hour later I'll find the old one.

Title: Re: Rear axle spacer
Post by Serowbot on 11/12/13 at 21:35:13

It's between the couch cushions...
...how it get's outta' my shop,.. I don't know... :-?...

Title: Re: Rear axle spacer
Post by old_rider on 11/13/13 at 07:41:19

I think dave made a spacer using a brass washer on his Ryca, anyway that's what came up when I did the "search" for axle spacer.

Title: Re: Rear axle spacer
Post by Dave on 11/13/13 at 09:30:22

595A52445F525344360 wrote:

I think dave made a spacer using a brass washer on his Ryca, anyway that's what came up when I did the "search" for axle spacer.

No....I narrowed a front axle spacer and used a brass washer to replace the shoulder I had cut away.

No sense in making one......time is money....and a new spacer from your dealer can't cost much.

How much stuff is in your garage? Axle spacers are not tiny.....