SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Avon coke bottle grips
/cgi-bin/YaBB.pl?num=1383258959

Message started by Ap5112 on 10/31/13 at 15:35:59

Title: Avon coke bottle grips
Post by Ap5112 on 10/31/13 at 15:35:59

Ok I bought 1inch Avon coke bottle grips the throttle side is to big and won't fit in the electrical throttle housing part I'm I missing something here I have 1inch bars and I seen these grips on other bikes before?

Title: Re: Avon coke bottle grips
Post by Serowbot on 10/31/13 at 16:38:25

If the left and right grips are the same size,.. you bought the wrong ones..
The right side should be a bigger ID... (thinner rubber)...

Title: Re: Avon coke bottle grips
Post by Ap5112 on 10/31/13 at 16:38:41

Nevermind I'm guessing I need metric cruiser grips right so any Avonmetric crui ser grips will work?

Title: Re: Avon coke bottle grips
Post by Ap5112 on 10/31/13 at 16:39:54

The throttle housing part is to small for the grip to fit

Title: Re: Avon coke bottle grips
Post by Dave on 10/31/13 at 17:35:45


416C706C616E747A3236000 wrote:
The throttle housing part is to small for the grip to fit


So you bought more than a set of grips....you bought grips that include a new throttle tube?

Title: Re: Avon coke bottle grips
Post by Ap5112 on 10/31/13 at 17:41:54

Yep

Title: Re: Avon coke bottle grips
Post by Ap5112 on 10/31/13 at 17:42:41

The throttle tube is already installed inside the grip

Title: Re: Avon coke bottle grips
Post by Ap5112 on 10/31/13 at 20:31:24

http://item.mobileweb.ebay.com/viewitem?itemId=161031125495     will these grips work?

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.