SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> savage down
/cgi-bin/YaBB.pl?num=1381869924

Message started by sleezyrider on 10/15/13 at 13:45:24

Title: savage down
Post by sleezyrider on 10/15/13 at 13:45:24

I was teaching a buddy to ride on my savage, and he ended up putting it into a short wall, which bent the foot peg and shifter, and they became loose. Bike still made it home but I can't seem to get a wrench on the nut to tighten the peg and shifter, is therean easy way to do this?

Title: Re: savage down
Post by sleezyrider on 10/15/13 at 17:24:57

Nobody huh

Title: Re: savage down
Post by Serowbot on 10/15/13 at 17:35:35

Don't know which nut... But, nuts don't tend to unscrew themselves in drop... Something got tweaked, stretched, or bent...
Try pulling the footpeg... see if that gets you better access?...

Title: Re: savage down
Post by sleezyrider on 10/15/13 at 17:55:31

If I were to buy another foot peg how would I even go about replacing it?

Title: Re: savage down
Post by WD on 10/15/13 at 17:59:36

Footpeg is held on with one allen head bolt. Shifter lever is held in place with a snap ring, it either works or it don't, nothing to tighten up. Remind me tomorrow and I'll get some pics for you, all that mess is off my bike right now.