SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Electro rev counter...wiring ? /cgi-bin/YaBB.pl?num=1380813079 Message started by chartman69 on 10/03/13 at 08:11:19 |
Title: Electro rev counter...wiring ? Post by chartman69 on 10/03/13 at 08:11:19 Hi I need to wire up my Rev counter on my Ryca style racer, it has four wires ( red Black and a Green and blue ) I assume the red and black are 12v Power feed, am I correct in thinking the green and blue wires go to the coil ? Cheers Ian |
Title: Re: Electro rev counter...wiring ? Post by Rix on 10/03/13 at 08:27:19 4 WIRES usually means 12v+, 12v-, coil- and illumination. |
Title: Re: Electro rev counter...wiring ? Post by chartman69 on 10/03/13 at 08:38:19 There is a rubber bung in the hole for the illumination so I don't think that's in the equation. |
Title: Re: Electro rev counter...wiring ? Post by Rix on 10/03/13 at 16:41:27 What brand? |
Title: Re: Electro rev counter...wiring ? Post by chartman69 on 10/04/13 at 13:18:09 its from Ryca |
Title: Re: Electro rev counter...wiring ? Post by jcstokes on 10/04/13 at 17:47:34 Your counter is probably generic, try www.jpcycles.com type in part number 560026 in the search, then when this downloads click on instructions pdf. might help. |
Title: Re: Electro rev counter...wiring ? Post by Dave on 10/05/13 at 13:43:02 You might go to the RYCA website, or their videos on YouTube. They probably show you how to connect the tach. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |