SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> Torque (need some help) /cgi-bin/YaBB.pl?num=1379328150 Message started by Bazûzeus on 09/16/13 at 03:42:27 |
Title: Torque (need some help) Post by Bazûzeus on 09/16/13 at 03:42:27 Hello everybody. I'm rebuilding my wife's Savage, and I've got some trouble to find the correcvt torque for some nuts and bolts. I know, there's the Clymer, and there's a dedicated topic on this forum, but as you can see, my english's not as fluent as I wish, and I've got no idea what's the technical name for "putain d'écrou central de la cloche d'embrayage" ;D So, before doing something wrong, could someone help me to set the correct torque for the following nuts & bolts ? (or of course, if you just give me their names I would find the correct torque by myslef ;)) |
Title: Re: Torque (need some help) Post by verslagen1 on 09/16/13 at 04:53:05 Looks like the right order Cylinder head nuts (9mm) 29.0 33.0 | 21.4 24.3 Cylinder head-to-cylinder nuts (8mm) 23.0 27.0 | 17.0 19.9 Clutch spring bolts 11.0 13.0 | 8.1 9.6 Clutch locknut 50.0 70.0 | 36.9 51.6 Primary drive gear nut (LH) 90.0 110.0 | 66.3 81.1 |
Title: Re: Torque (need some help) Post by Bazûzeus on 09/16/13 at 05:05:58 Thanks ! So if I undestrand well : Cylinder head nuts (9mm) = Image 101 Cylinder head-to-cylinder nuts (8mm) = Images 102/103 Spring bolts = Image 9 Clutch locknut = Image 12 Primary drive gear nut =Image 245 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |