SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Key Blank
/cgi-bin/YaBB.pl?num=1378813034

Message started by doctorpc on 09/10/13 at 04:37:14

Title: Key Blank
Post by doctorpc on 09/10/13 at 04:37:14

does any one know where i can get new key blanks for the s40? every locksmith i go to has real long blanks that sdtick out too far to make me comfortable that i wont break them off

thank you

Title: Re: Key Blank
Post by Dave on 09/10/13 at 05:22:59

I got mine off eBay. You have to match the shape when you order - but it was the easiest and cheapest source.

Title: Re: Key Blank
Post by Paladin. on 09/10/13 at 05:30:05

7E75796E75686A791A0 wrote:

does any one know where i can get new key blanks for the s40? every locksmith i go to has real long blanks that sdtick out too far to make me comfortable that i wont break them off

thank you

The correct key is the Ilco X179 SUZ12.

Title: Re: Key Blank
Post by SteveIsGr8 on 09/10/13 at 06:55:30

The dealer has the blanks. I got mine for like $7 or $8. I know everyone likes to refer to them as the "stealership" but not all of them are bad.

Title: Re: Key Blank
Post by Gyrobob on 09/10/13 at 07:47:05

Ebay $5 free shipping

item number 370750995063

Title: Re: Key Blank
Post by Gyrobob on 09/10/13 at 08:28:15

here's another thought,...

Buy the long blank from the locksmith and cut it down to a size you like.

I doubt, though, you'll find a blank for less than that ebay one for $5.

Title: Re: Key Blank
Post by thumperclone on 09/10/13 at 08:44:12

ilco x118 yh49

Title: Re: Key Blank
Post by Dave on 09/10/13 at 09:16:22

667A677F627760717E7D7C77120 wrote:

ilco x118 yh49

Ilco X179 SUZ12.
]ilco x118 yh49

Not all of the Savages used the same blank.....you need to match your key up with the proper blank.

Title: Re: Key Blank
Post by wambr on 09/11/13 at 10:20:49

and I used a template from Toyota... all together we have cost about$5

Title: Re: Key Blank
Post by ZAR on 09/11/13 at 19:59:30

Don't remember what the number is off hand but I got mine from the local hardware store for $2.49 including the cutting. Sure it does not have the black rubber at the head but who cares?