SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Cam shaft position/ timing
/cgi-bin/YaBB.pl?num=1375738168

Message started by Riggsja on 08/05/13 at 14:29:28

Title: Cam shaft position/ timing
Post by Riggsja on 08/05/13 at 14:29:28

Ok everyone, I am pretty sure I just messed up. I had a recent problem with the little bolts that attach the Cam shaft sprocket to the actual cam shaft. The bolts backed out and the "C" bracket let go and got spun up and twisted around allowing the cam chain tensioner to let go. Now here is the problem... Upon disassembly I took out the cam shaft and everything without making match marks. Any ideas on how to go about reassembling with out completely screwing up timing? :-?

Title: Re: Cam shaft position/ timing
Post by verslagen1 on 08/05/13 at 14:41:40

provided you haven't screwed up the valves or piston, just start from square 1...

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1256079122

Title: Re: Cam shaft position/ timing
Post by Riggsja on 08/06/13 at 06:39:14

I haven't put anything back yet. I just had the light bulb go off while i was in line at the store.

Title: Re: Cam shaft position/ timing
Post by Riggsja on 08/06/13 at 06:46:07

I also wanted to thankyou for that link!!!! AWESOME! You're a lifesaver