SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Cafe >> Kinda neat.......
/cgi-bin/YaBB.pl?num=1375628736

Message started by raydawg on 08/04/13 at 08:05:36

Title: Kinda neat.......
Post by raydawg on 08/04/13 at 08:05:36

It sure looks like it has a time stamp attached to it, yes?

http://seattle.craigslist.org/sno/mcy/3962720529.html

Title: Re: Kinda neat.......
Post by WD on 08/04/13 at 08:19:27

Very nice looking, but badly overpriced. You can buy a clean used 1500 Drifter for less than that.

Title: Re: Kinda neat.......
Post by ToesNose on 08/04/13 at 11:09:24

I'm a fan of the C-5 my self.  ;)

Title: Re: Kinda neat.......
Post by MMRanch on 08/04/13 at 19:17:53

Raydawg

I went to investigate one of these befor I bought a S-40 to replace my worn-out Savage.  

They are geared to top-out in the mid 80's  ... or so the dealer said -(He was ridding one as his personal ride).   The one the dealer was ridding looked good and had all the good stuff I would put on one.

Well , the rear sprocket is made into the hub , so when it wears out you just put a new hub on.   The hub stayes on the bike when you take the rear tire off (as in easy flat tire repair).    But  all this means "You can't put a different size rear sprocket on it !  :(

So ...  That takes us to the front sprocket   only two sizes are avalible either a  16 or a 17 tooth  , the dealer allready had the 17 tooth on his and said , "That's  why it tops out in the 80's instead of the high 70's .  :( :'(

If I could have geared it to top-out near 100 (as in cruse at 75) I might have tried to make a deal with him for one of them.

I replace the Savage with a 07   S-40 .

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.