SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> igniter plug wires! /cgi-bin/YaBB.pl?num=1371437011 Message started by Garrett on 06/16/13 at 19:43:30 |
Title: igniter plug wires! Post by Garrett on 06/16/13 at 19:43:30 alright guys, i been doing some cleaning up on my 1986 ls650's wires and getting a really basic wire harness on the bike. then i got to the igniter. and sure as crap if the wires didnt rot and fall out of the plug. i am wondering if they make plugs with the wires to simply butt connect or if i have to try and solder them together.. any help would be awesome! |
Title: Re: igniter plug wires! Post by Garrett on 06/16/13 at 19:49:35 on edit: i found this link on here ;D http://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/FKWH/fkwh.html will the 8 position plug really work? and can i have a picture of where the wires plug into the plug? because every wire came out except 2 :-/ i am not to sure where the wires go! |
Title: Re: igniter plug wires! Post by 87 savage on 06/17/13 at 02:01:21 Hey Garrett, here is the wiring diagram for your bike: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1294779818 |
Title: Re: igniter plug wires! Post by splash07 on 06/17/13 at 07:31:35 I have purchsed and installed one of these connectors and it works great. You need to buy a couple to get up to the 20 dollar minimum. Also you will need a special crimping tool to crimp the connectors on the wires, I found it at radio shack for like 6 bucks. |
Title: Re: igniter plug wires! Post by Digger on 06/23/13 at 20:13:56 Here's another good source I've used for the connector housings on our bikes: http://www.vintageconnections.com/ The owner is really nice and will help you learn how to do the crimps. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |