SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> hardtail with 18" harley rear tire /cgi-bin/YaBB.pl?num=1371303618 Message started by napier13 on 06/15/13 at 06:40:18 |
Title: hardtail with 18" harley rear tire Post by napier13 on 06/15/13 at 06:40:18 has anyone ever done this? tips tricks???any info would be great ....thanks respects napier13 |
Title: Re: hardtail with 18" harley rear tire Post by ZAR on 06/15/13 at 09:27:26 Check out BCB(blue collar bobbers)and RYCAs sites. They make kits to do what you are looking for. |
Title: Re: hardtail with 18" harley rear tire Post by busterboy on 06/16/13 at 18:23:23 The BCB kits do not hardtail the bike. Its just a fender swap. |
Title: Re: hardtail with 18" harley rear tire Post by napier13 on 06/17/13 at 05:46:26 thanks for the tip on ryca ...but i'm building the frame...i just wanted to know if the motor would turn the bigger tire...just for reference i'm want to go to a chain drive disk break on the rear...i just didn't know if anyone had done this or what size sprockets to use....thanks respects napier13 |
Title: Re: hardtail with 18" harley rear tire Post by Arnold on 06/17/13 at 10:50:39 But why wouldnt the motor turn a bigger tire? |
Title: Re: hardtail with 18" harley rear tire Post by napier13 on 06/17/13 at 19:42:02 i just don't want to put in the work and the bike top out at 55mph...lol i have no doubt that it would turn it but the gear ratio is where i'm stuck between harley wheels and sprocket thanks respects napier13 |
Title: Re: hardtail with 18" harley rear tire Post by ZAR on 06/17/13 at 20:07:17 2A3D3B3C2D3A2A2731480 wrote:
:-? :-[ my bad! Got my info crossed up....sorry bout that! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |