SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Question... is the square backbone open... /cgi-bin/YaBB.pl?num=1369594908 Message started by verslagen1 on 05/26/13 at 12:01:48 |
Title: Question... is the square backbone open... Post by verslagen1 on 05/26/13 at 12:01:48 to the rest of the frame? |
Title: Re: Question... is the square backbone open... Post by arteacher on 05/26/13 at 13:00:20 I don't know, but I am dying to know why you want to. :-? |
Title: Re: Question... is the square backbone open... Post by Jack_650 on 05/26/13 at 14:23:24 Be a great path for running cables and such wouldn't it? Jack |
Title: Re: Question... is the square backbone open... Post by paulmarshall on 05/26/13 at 14:46:00 444F4F464A45445E5F2B0 wrote:
Me too. :-? |
Title: Re: Question... is the square backbone open... Post by srinath on 05/26/13 at 15:43:22 The square part of the frame you can stick a 18-24" long dowel into it just below where the relay unit is - the thing is open to the air ... Cool. Srinath. |
Title: Re: Question... is the square backbone open... Post by srinath on 05/26/13 at 15:48:14 Ooo open to the rest of the frame - not to air - I would say hell no. Why would they, its another big big big machining step. An angle hollow mill - they have those, its used to punch huge holes in I beams. I have a 43 mm or so one to make SV1000 triples. A 39mm one could be used for a savage ... but well, the frame, no. Cool. Srinath. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |