SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Turn signals /cgi-bin/YaBB.pl?num=1369101331 Message started by Doug on 05/20/13 at 18:55:30

Title: Turn signals Post by Doug on 05/20/13 at 18:55:30 ...I bought some new turn signals which I am attempting to install. I need help from step one. I don't know how to remove the stock ones.

Title: Re: Turn signals Post by Dave on 05/21/13 at 07:10:59 Front or rear? The turn signals are held in by screws that are in the side of the mount, and they can be very tight or corroded and hard to remove.  The front turn signal wiring is connected in the headlight bucket.  The rear turn signal wiring is run through the heavy chrome sidde reinforcement pieces on each side of the fender.....and to access the wiring and remove it properly.....you need to remove those chrome pieces.

Title: Re: Turn signals Post by Doug on 05/21/13 at 11:40:43 5A616C7B6A667D7B6068657A090 wrote: Front or rear? The turn signals are held in by screws that are in the side of the mount, and they can be very tight or corroded and hard to remove.  The front turn signal wiring is connected in the headlight bucket.  The rear turn signal wiring is run through the heavy chrome sidde reinforcement pieces on each side of the fender.....and to access the wiring and remove it properly.....you need to remove those chrome pieces. Ah, I see. Thanks for the help.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.