SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Porting the exhaust /cgi-bin/YaBB.pl?num=1368906174 Message started by paulmarshall on 05/18/13 at 12:42:43

Title: Porting the exhaust Post by paulmarshall on 05/18/13 at 12:42:43 I understand that when removing metal it should be done evenly. However when it comes to the Savage we are limited because of design. In this case can the exhaust be ported more where I have illustrated with the red lines in pic. Can it be a oval?

Title: Re: Porting the exhaust Post by LANCER on 05/18/13 at 15:37:13 I did mine in somewhat of a D shape, with the bottom being the flat side of the D.

Title: Re: Porting the exhaust Post by verslagen1 on 05/18/13 at 18:47:28 there's a couple of links in here... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1291516932

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.