SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Special tools for the Savage/S40 /cgi-bin/YaBB.pl?num=1368640837 Message started by DavidOfMA on 05/15/13 at 11:00:37 |
Title: Special tools for the Savage/S40 Post by DavidOfMA on 05/15/13 at 11:00:37 It occurred to me while working on my bike this weekend that a list of "special" tools for typical maintenance would be helpful. So far, besides the usual assortment of screwdrivers, metric wrenches, and pliers I'd use for a car, at 10,000 miles on my S40, I've acquired the following in roughly this order: Offset screwdriver for adjusting rear shocks 14mm ratchet wrench for changing oil Torque wrench that measures inch-pounds Magnetic driver for getting at tiny screws without losing them PB Blaster for unfreezing stuck carb screws Carb cleaning wires Harbor Freight small impact driver for loosening carb screws Serrated #2 Phillips screwdriver bit (from Lowes) for carb screw removal .003 & .004 bent feeler gauges for valve adjustment Cable oiler for throttle and clutch cable oiling What else are those of us new (or new again) to motorcycle maintenance likely to need as we get more comfortable working on this bike and as things continue to wear? |
Title: Re: Special tools for the Savage/S40 Post by Dave on 05/15/13 at 11:04:00 An absolute must have for anyone working on motorycles with phillips head screws.....is an Impact Driver. |
Title: Re: Special tools for the Savage/S40 Post by justin_o_guy2 on 05/15/13 at 11:04:51 Offset driver (flat) for holding valve adjusters while snugging the jam nut. |
Title: Re: Special tools for the Savage/S40 Post by DavidOfMA on 05/15/13 at 11:09:32 746B6D6A7770417141796B672C1E0 wrote:
Yes, that would have been handy last weekend. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |