SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Question on Front brake rotor replacement.
/cgi-bin/YaBB.pl?num=1368541777

Message started by jachase1980 on 05/14/13 at 07:29:37

Title: Question on Front brake rotor replacement.
Post by jachase1980 on 05/14/13 at 07:29:37

Does anyone suggest a decent rotor?

only found one that bikebandit says fits my 2000 ls650.
http://www.bikebandit.com/ebc-pro-lite-brake-rotor?m=147741

thanks in advance.

Title: Re: Question on Front brake rotor replacement.
Post by Gyrobob on 05/14/13 at 07:59:19

What happened to your rotor?

Title: Re: Question on Front brake rotor replacement.
Post by jachase1980 on 05/14/13 at 08:27:46

it has 3 lines worn into the actual rotor. Ive only had this bike for 4 weeks now, the rotor was like this when bought. 3400 miles.

Title: Re: Question on Front brake rotor replacement.
Post by verslagen1 on 05/14/13 at 08:35:19

sounds like it picked up some dirt.

unless it's below the minimum thickness (4.2 mm ? )

ride with it.  The pads will wear to match the grooves.

becareful of those bolts when you swap it out.  apply some pen oil to the threads and allow it to soak in.

Title: Re: Question on Front brake rotor replacement.
Post by justin_o_guy2 on 05/14/13 at 09:47:00

The best stoppin car I ever had had rotors with deep grooves in them. Once the pads wore into those grooves that thing would dang near do a stoppie..

Title: Re: Question on Front brake rotor replacement.
Post by gdrseeker on 05/14/13 at 11:33:37

I have one I'll sell you for less than half that price if you are interested.

It is a stock rotor no issues at all.  I got one with holes drilled in it so I have an extra.  I will post a pic later.

Title: Re: Question on Front brake rotor replacement.
Post by gdrseeker on 05/14/13 at 11:52:44

If you are interested I will sell it for $50 Shipped US.

PM me with your Mailing address.  Paypal info is gdrseeker@charter.net

http://i1282.photobucket.com/albums/a521/gdrseeker/CAM00010_zpsfb79a65d.jpg

Title: Re: Question on Front brake rotor replacement.
Post by keith217 on 05/14/13 at 14:04:37


7F6066617C7B4A7A4A72606C27150 wrote:
The best stoppin car I ever had had rotors with deep grooves in them. Once the pads wore into those grooves that thing would dang near do a stoppie..

Hahahahaha. Cars are a different story though. You need to refinish them and you get the squeeking noises.

If you really think you need a replacement, hey go ahead and do it. Can't put a price on peace of mind  ;D ;D

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.