SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front splash guard /cgi-bin/YaBB.pl?num=1368380717 Message started by NorCalRider on 05/12/13 at 10:45:16 |
Title: Front splash guard Post by NorCalRider on 05/12/13 at 10:45:16 I would like to add a splash/mud guard to the front fender so my legs do not get sprayed on wet roads. But I am having a hard time finding them. I am sure you folks have come across this problem and have done something. Would love any ideas or sources. Thanks. |
Title: Re: Front splash guard Post by verslagen1 on 05/12/13 at 11:00:31 http://www.ebay.com/itm/160894670238?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 |
Title: Re: Front splash guard Post by NorCalRider on 05/13/13 at 16:45:16 Thanks, Versy. I will check it out. |
Title: Re: Front splash guard Post by raydawg on 05/14/13 at 16:08:23 I put one on, I think I got it at Bike Bandit for around 8 bucks, came with the hardware, stainless too....its a rubber one as opposed to leather, works great. If you like I can take a pix of it to show you, you must drill 3 holes in your fender. |
Title: Re: Front splash guard Post by NorCalRider on 05/14/13 at 16:22:56 That would be great. Or, if it is easier, a URL or part number will do too. |
Title: Re: Front splash guard Post by raydawg on 05/14/13 at 20:20:47 Here ya go..... http://www.cruisercustomizing.com/rubber-mud-flap-medium/part/DS-393702 |
Title: Re: Front splash guard Post by Boofer on 05/14/13 at 21:44:59 Grab an old piece of mud flap from a trucking company and get a mild steel piece about 3/4" wide to use as a stiffener. drill three holes in it and the rubber install so Bolts dont ruin a good tire. Or buy one. ;) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |