|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> I had an idea /cgi-bin/YaBB.pl?num=1367335255 Message started by wambr on 04/30/13 at 08:20:55 |
|
Title: I had an idea Post by wambr on 04/30/13 at 08:20:55 once here on the forum many of you, guys, have had trouble in the form of oil leakage into the connector cable speedometer . it is a pity, of course, that this was not the thought came to me at once... Oh well... in General, after repair of the engine in a box with junk in the garage my eyes caught the old valve seals.. i identifying them on the speedo cable and I found almost complete coincidence of sizes. for a normal install accounted for just cut off the bottom of the metal part of the gland to a thickness of 4 mm and remove the spring . and here he was, a new speedo cable seal is ready. (explain photos, as it seems to me much sense not, but if need be, I 'll try to do them), while that with this gland is not hit no one kilometer... but we'll see... ;) |
|
Title: Re: I had an idea Post by Serowbot on 04/30/13 at 11:03:51 HowTo Post Pic's (http://suzukisavage.com/cgi-bin/YaBB.pl?num=1347074669) |
|
Title: Re: I had an idea Post by paulmarshall on 04/30/13 at 11:08:45 697F68756D78756E1A0 wrote:
I have tried many times to post pic just as it has been described here, and it doesn't work for me. Is it because I run Windows 7 ? :-[ |
|
Title: Re: I had an idea Post by Coaxial on 04/30/13 at 11:11:12 Paul I strongly reccomend imgur. www.imgur.com You dont have to create an account but its nice to have one. Drag the whole bunch of images right onto the site and it will do it for you. |
|
Title: Re: I had an idea Post by paulmarshall on 04/30/13 at 11:12:51 725E504958505D310 wrote:
Is that like Photobucket? |
|
Title: Re: I had an idea Post by Coaxial on 04/30/13 at 11:41:02 almost. but its more intuitive |
|
Title: Re: I had an idea Post by justin_o_guy2 on 04/30/13 at 11:44:56 I intuitively gravitate to all things intuitive,, I picked up my wifes I phone & was able to actually DO some things.. with no help.UHH Mazing,, |
|
Title: Re: I had an idea Post by ToesNose on 04/30/13 at 13:48:47 I couldn't imagine anything being easier then PhotoBucket :-? Click upload, brows your PC to find the pic and upload. When done the pic is there waiting to be linked. |
|
Title: Re: I had an idea Post by wambr on 04/30/13 at 21:36:58 probably my computer translator is not very good... I have no problems with the placement of photos . just at first I thought that they are not necessary. do today and post them here.. |
|
Title: Re: I had an idea Post by wambr on 05/03/13 at 23:49:59 here he is, has already reached its valve seal.... http://cs315327.vk.me/v315327733/6076/EYxnr6-m9v0.jpg cut off from it is not necessary for us part, about which I wrote above.... http://cs315327.vk.me/v315327733/6088/N7CyBBRUPdc.jpg we have just what we need... http://cs315327.vk.me/v315327733/607f/d1lR29uelww.jpg http://cs315327.vk.me/v315327733/6091/UtRs5vzZsNQ.jpg the rest http://cs315327.vk.me/v315327733/609a/oHvWl7zrH_k.jpg can be thrown in the trash now you only have to check how many miles I can go with this seal, but it seems to me he is still long and good will |
|
Title: Re: I had an idea Post by ToesNose on 05/04/13 at 03:38:09 Thanks Wambr :) |
|
Title: Re: I had an idea Post by Digger on 05/04/13 at 18:06:14 Wam, Please let us know how long it lasts.... Thanks! |
|
Title: Re: I had an idea Post by justin_o_guy2 on 05/05/13 at 08:32:28 & I took an O ring that was too big, cut a section out & slapped it in. NO leak. IF you do that, make the cuts at an angle, a steep angle. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |